Novak Crusher 2-4S Brushless ESC w/Simple Tuner (NOV1834)

This is the Novak Crusher Brushless 2S-4S Electronic Speed Control
updated with Simple Tuner Firmware.

FEATURES
Rugged performance for 2S-4S rock crawling, rock racing, trail
hauling, short course, and non-racing "go fast" setups
Compatible with 540 and 550-size sensored brushless motors
Power Hill/Hold Brakes for extreme holding power during crawling
Auto-detect driving profile - crawling and extreme sport
Dynamic Timing Advance for increased RPM
Novak X-Drive provides enhanced throttle response, smooth power
delivery, higher top speeds, and cooler operating temperatures
Simple Tuner includes four, pre-loaded profiles for each of the
most popular applications. Each profile is 100% customizable
Profile #1 BASHER-Standard modes w/reverse, default profile &
ready for action
Profile #2 SPORT-Standard modes w/no reverse. Defaults set w/
no timing for "blinky" mode racing. Great starting profile for
club & spec racing
Profile #3 TIMING TEST-Standard modes of operation w/preset
mild timing level & low power brakes, ideal for speed run
testing
Profile #4 CRAWLING Rock crawling features enabled when used w/
Novak rock crawling brushless motor-powered hill/hold brakes,
instant reverse & Rock Boost
5A BEC for today's high powered servos
On-board diagnostic temperature monitoring, and thermal overload
protection
One-Touch Set-Up for quick transmitter setup
Gold plated wiring tabs for flexible soldering options

INCLUDES
Crusher Brushless 2S-4S ESC, with Cooling Fan, Heat Sink, 14G Power
Wires, Instructions

SPECIFICATIONS
Motor Type: Sensored Brushless (540, 550, 4-Pole, Novak Crawling)
Motor Limit:
Brushless 2S: 6.5-turn or higher 540-size (13.5-turn or higher Novak
Crawler); 4.5-turn or higher 550-size; 4600kV or lower 4-pole
Brushless 3S: 13.5-turn or higher 540-size (18.5-turn or higher Novak
Crawler); 6.5-turn or higher 550-size; 3500kV or lower 4-pole
Brushless 4S: 13.5-turn or higher 540-size (18.5-turn or higher Novak
Crawler); Not recommended for 550-size or 4-Pole motors
Fwd/Brk/Rev: Standard Mode: Forward/Brake/Reverse (OFF/ON)
Crawling Mode: Forward/Drag Brake/Reverse
Input Cells: 2-4S LiPo, 4-14 NiMH
(LiPo recommended for performance setups, and when using RPM boost
timing)
BEC: 6.0V/5.0 amps (external BEC required for 3S/4S setups)
Dimensions: 1.16 x 1.47 x 0.96" (29.5 x 37.3 x 24.4mm)
Weight: 1.42oz. (40.4g)
On Resistance: 0.00040 ohms @ 25°C trans temp (brushless)
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire