Address: 1534 Plaza Drive., Hamilton, OH 45013 Phone: 513-892-1456 Hours: Monday- Friday 10am - 7pm; Saturday 9am - 5pm; Sunday 11am - 4pm
Cart 0
Traxxas Aluminum Tuned Pipe/Header Set Blue (TRA4485)


Traxxas Aluminum Tuned Pipe/Header Set Blue (TRA4485)

$ 49.99

This is an Aluminum Tuned Pipe and Header Assembly.   For any car with a side exhaust and sideways mounted .12-.15 size engine.

  • Blue anodized aluminum manifold, tuned pipe and pressure fitting.
  • Header wraps around the back of the engine, angling downward at
  • 30 degrees, and levels off straight. This would point the tuned pipe toward the front of the model.
  • Allows the engine to have strong power across mid & upper RPM range.
  • Will wrap around most pull starter assemblies.

  • One Header (manifold)
  • One Tuned Pipe w/ 90 degree pressure fitting installed
  • One White Silicone Coupler
  • Two Black Tie Straps (for the coupler)
  • One piece of blue standard size Fuel Tubing (for fuel tank pressure)
  • One Exhaust Gasket
  • Two 3 x 23mm cap head Screws (for mounting header to engine)
  • Two 3mm lock Washers (for mounting header to engine)
  • One 3" Mounting Wire (for securing pipe to the chassis)
  • One 4 x 4mm Set Screw (for securing wire to the pipe)
  • One 3 x 10mm flat head Screw (for securing pipe to the chassis)
  • One 3mm nylon Nut (for securing pipe to the chassis)

  • Assembling onto a .12 to .15 size engine and chassis.
  • 2mm and 2.5mm hex driver and 5.5mm nut driver.

  • Pipe Length: 114.6mm
  • Diameter: 32.1mm
  • Header mounting holes on center: 27.5mm

Share this Product